Our Products
Oil Drilling
ASEL CMC LV
LOW VISCOSITY CARBOXYMETHYL CELLULOSE DRILLING GRADE
ASEL CMC LV is an API drilling mud which is flown into the drilling pipes to give suitable flow
properties, to carry the drill chippings to the surface, to improve water retention of muds and to prevent excessive penetration of drilling liquids into the surrounding. ASEL CMC LV is well known cost-effective API fluid loss reducer.
Appearance | Creamy White, Free Flowing Powder and/or Granulated |
Active Content (on dry basis) | %55 min. |
Degree of Substitution | Min 0.80 |
PH (1%) | 7 – 11 |
Moisture (as packed) | %8 max. |
PROPERTIES ACCORDING TO API SPEC 13A (ISO 13500:2008)
Starch or Starch Derivative Presence None/Absent
Apparent Viscosity 90 Cps Max.
Filtrate Volume 10 Ml Max.
ASEL CMC HV
HIGH VISCOSITY CARBOXYMETHYL CELLULOSE DRILLING GRADE
ASEL CMC HV is a high viscosity and cost effective additive used to reduce API filtration rate of drilling fluid. Suited for water-loss and rheological control in low-solids mud and highly efficient viscosity in all other muds. ASEL CMC HV is also well known cost-effective viscosifier for Fresh Water, Sea Water, and Salt Saturated Water fluid systems.
Appearance | Creamy White, Free Flowing Powder and/or Granulated |
Active Content (on dry basis) | %70 min. |
Degree of Substitution | Min 0.80 |
PH (1%) | 7 – 11 |
Moisture (as packed) | %8 Max. |
PROPERTIES ACCORDING TO API SPEC 13A (ISO 13500:2008)
Starch or Starch Derivates Presence None/Absent
Viscometer Dial Reading at 600 r/min.
– In dionized Water Minimum 30
– In 40g/l salt solution Minimum 30
– In saturated salt Water Minimum 30
Filtrate Volume (mililitres) Maximum 10
ASEL PAC LV
POLYANIONIC CELLULOSE DRILLING GRADE
ASEL PAC LV is widely used in water-based drilling fluids for a variety of applications, such as filtration control, viscosity and shale inhibition. Although field use can vary, this procedure focuses on filtration control and viscosity characteristics. High Substitution Degree of ASEL PAC LV also ensures compatibility with other drilling fluid additives.
Appearance | White to Creamy, Free Flowing Powder |
Active Content (on dry basis) | %70 min. |
Degree of Substitution | Min 0.90 |
PH (1%) | 7 – 11 |
PROPERTIES ACCORDING TO API SPEC 13A (ISO 13500:2008)
Presence of Starch None/Absent
Moisture Content Maximum 10%
Apparent Viscosity Maximum 40 Cps
Filtrate Volume Maximum 16 Ml
Detergent
Paste Detergent
ASEL TD 12
PASTE DETERGENT GRADETECHNICAL SODIUM CARBOXYMETHYLCELLULOSE
ASEL TD 12 is used in the production of cream detergent because it eliminates dryness and hardening of cream detergent due to its water- retaining and bindering properties.In liquid detergents, by using a small amount of CMC it is assured to control the viscosity and to retain more water.
Appearance | Creamy White, Free Flowing Powder or Granulated |
CMS content (on dry basis) % | %63 Min. |
Degree of Substitution | 0.4 – 0.6 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | 50-200 Cps |
Moisture (as packed) % | %8 Max. |
ASEL ZF 1000
CARBOXYMETHYL CELLULOSE
ASEL ZF 1000 has wide functions into glue&adhesive applications for decorative paint, liquid and regular wallpaper, and also thickening, binding, and viscosity modifier functions for construction, paint and as well as detergent industry. During the application, it is advised to solve ASEL ZF 1000 thoroughly in water to get a better result.
Appearance | Creamy White, Free Flowing Powder |
CMS content (on dry basis) % | %60 Min. |
Degree of Substitution | 0.6 – 0.8 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | Min. 1000 Cps |
Moisture (as packed) % | %8 Max. |
ASEL TD 1000
EXTRA WHITE CARBOXYMETHYL CELLULOSE
ASEL TD 1000 has wide functions into glue &adhesive applications for decorative paint, liquid and regular wallpaper, and also thickening, binding, and viscosity modifier functions for construction, paint and as well as detergent industry. During the application, it is advised to solve ASEL TD 1000 thoroughly in water to get a better result.
Appearance | Extra White, Free Flowing Powder |
CMS content (on dry basis) % | %60 Min. |
Degree of Substitution | 0.6 – 0.8 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | Min 1100 Cps |
Moisture (as packed) % | %8 Max. |
ASEL TD 2000
EXTRA WHITE HIGH VISCOSITY SODIUM CARBOXYMETHYL CELLULOSE
ASEL TD 2000 has very wide range applications such as detergent industry, construction industry, paint industry and as well as glue in wallpaper industry. During the application, it is advisable to solve CMC ASEL TD 2000 throughly in water to get a better result.
Appearance | Extra White, Free Flowing Powder |
CMS content (on dry basis) % | %55 Min. |
Degree of Substitution | 0.6 – 0.8 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | 2000-2500 Cps |
Moisture (as packed) % | %8 Max. |
Powder Detergent
ASEL TD 6 G
GRANULAR POWDER DETERGENT TYPE TECHNICAL SODIUM CARBOXYMETHYL CELLULOSE
The use of ASEL TD 6 G in detergents improves its cleaning power by acting as an antiredeposition agent which presents the dirt already removed by synthetic detergents from sticking to the fabric during washing. ASEL TD 6 G is used in powder detergent production. In detergent, by using CMC it is assured to control the viscosity and to retain more water. During the application, it is advisable to solve CMC in water to get a better result.
Appearance | Creamy White, Free Flowing, Granulated |
CMC content (on dry basis) % | 70 min. |
Degree of Substitution | 0.5 – 0.8 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | 40 – 100 cps |
Density g/ml | 500 min |
Moisture (as packed) % | 8 Max. |
Sieve Analysis:
P>710 µm 0-20%
355 µm 65-75%
P<355 µm 5-15%
ASEL TD 6 GX
POWDER DETERGENT GRADETECHNICAL SODIUM CARBOXYMETHYL CELLULOSE
The use of ASEL TD 6 GX in detergents improves its cleaning power by acting as an anti-redeposition agent which presents the dirt already removed by synthetic detergents from sticking to the fabric during washing. ASEL TD 6 GX is used in powder detergent production. In detergent, by using CMC it is assured to control the viscosity and to retain more water. During the application, it is advisable to solve CMC throughly in water to get a better result.
Appearance | Creamy White, Free Flowing, Granulated |
CMC content (on dry basis) % | %70 min. |
Degree of Substitution | 0.4 – 0.6 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | 40 – 100 cps |
Density g/ml | 420-500 |
Moisture (as packed) % | 8 Max. |
Sieve Analysis:
P>1410 µm 0
105 µm 75-100%
P<105 µm 0-25%
ASEL TD 6
TOZ DETERJAN TİPİ TEKNİK SODYUM KARBOKSİMETİL SELÜLOZ
The use of ASEL TD 6 in detergents improves its cleaning power by acting as an antiredeposition agent which presents the dirt already removed by synthetic detergents fromsticking to the fabric during washing. ASEL TD 6 is used in powder detergent production. In detergent, by using CMC it is assured to control the viscosity and to retain more water. During the application, it is advisable to solve CMC in water to get a better result.
Appearance | Creamy White, Free Flowing, Powder |
CMC content (on dry basis) % | %70 Min. |
Degree of Substitution | 0.4 – 0.6 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | 10-40 Cps |
Moisture (as packed) % | 8 Max. |
Textile
ASEL TN 40
In the textile industry, ASEL TN 40 is used for warp sizing of both cotton and synthetic yarns, either alone or together with synthetic and starch sizes. Due to its solubility in water and semi-plastic structure, ASEL TN 40 can form a flexible film layer around which prevents break ups and dust during weaving and strengthen the resistance of yarn, therefore, increases productivity and improves the quality of fabrics.
Considering the importance of high quality dyeing and printing; ASEL TN 40 will give you an efficient removing of sizing agents from the fabric just by washing out with water, hence , you would not need any enzymes and steam, it also maximizes your benefits, does not create any pollution, increases quality and efficiency of dyeing and finally there would not be any change in quality of fabrics.
TEXTILE TYPE TECHNICAL SODIUM CARBOXYMETHYL CELLULOSE
Appearance | White to creamy, free flowing powder or granulated |
CMC content (on dry basis) % | 60 +- 2 |
Degree of Substitution | 0.6 – 0.8 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | 40 – 100 cps |
Moisture (as packed) % | 10 max |
Paint
ASEL TD 60
PAINT GRADE TECHNICAL SODIUM CARBOXYMETHYL CELLULOSE
By using ASEL TD 60 in both powder and liquid paints, it will provide homogenization in stagnant paint solution and controls the viscosity. By using a small amount of ASEL TD 60 the viscosity can be controlled well in solution prepared from powder paints. As the amount of ASEL TD 60 will be increased in paint solution, the viscosity will also increase and solution will reach better homogenization.
In application of paint containing ASEL TD 60, it will give a better, clean appearance on the painted surfaces because of formed transparent film layer which avoids stickiness and smeareness.
Appearance | Creamy White, Free Flowing Powder |
Active Content (on dry basis) | %63 min. |
Degree of Substitution | 0.6 – 0.8 |
PH (%1) | 8 – 10 |
Viscosity (%2 Sol. Brookfield, 20°C) | 200 -250 cps |
Moisture (as packed) | %8 max. |
ASEL TD 100
PAINT GRADE CARBOXYMETHYLCELLULOSE
ASEL TD 100 usage in paints, provides better homogenization in stagnant paint solution and ensures controlling the viscosity. After small amount of ASEL TD 100 usage, the viscosity can be controlled very well in solution which prepared from powder paints. In application of ASEL TD 100, gives a clean and better appearance on the painted surfaces.
Appearance | Creamy White, Free Flowing Granulated |
Active Content (on dry basis) | %63 min. |
Degree of Substitution | 0.6 – 0.8 |
PH (%1) | 8 – 11 |
Viscosity (%2 Sol. Brookfield, 20°C) | 200 -250 cps |
Moisture (as packed) | %8 max. |
Adhesives and Thickener
ASEL TY 70
CMC is a cellulose based water soluble polymer which has excellent film forming properties. Due to the cellulose based structure it is a perfect adhesive for other cellulose materials such as paper. Thus, CMC shows excellent distinction as a wall paper adhesive either alone or with other polymers.
GLUE TYPE TECHNICAL SODIUM CARBOXYMETHYL CELLULOSE
Appearance | White to creamy, free flowing powder or granulated |
CMC content (on dry basis) % | 60 +- 2 |
Degree of Substitution | 0.7 – 0.8 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | 150 – 200 cps |
Moisture (as packed) % | 15 max |
PREPERATION OF GLUE
PAPER GRADE | WATER QUANTITY PER KG (LT) | NUMBERS OF ROLLS TO STICK | SURFACE TO STICK (m2) |
FINE PAPER | 32 | 20-25 | 100-125 |
EMBOSSED PAPER | 25 | 15-20 | 75-100 |
VINYL PAPER | 18 | 12-17 | 60-85 |
ASEL TY 300
GLUE TYPE TECHNICAL SODIUM CARBOXYMETHYL CELLULOSE
Appearance | White to creamy, free flowing powder or granulated |
CMC content (on dry basis) % | 60 +- 2 |
Degree of Substitution | 0.7 – 0.8 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | 300 – 600 cps |
Moisture (as packed) % | 15 max |
ASEL TY 400
GLUE TYPE SODIUM CARBOXYMETHYL STARCH
Appearance | White to creamy, free flowing powder or granulated |
CMS content (on dry basis) % | 80 +- 2 |
Degree of Substitution | 0.2 – 0.3 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | 500 – 1500 cps |
Moisture (as packed) % | 10 max |
PREPARATION OF GLUE
PAPER GRADE | WATER QUANTITY PER KG (LT) | NUMBERS OF ROLLS TO STICK | SURFACE TO STICK (m2) |
FINE PAPER | 64 | 40-50 | 200-250 |
EMBOSSED PAPER | 50 | 30-40 | 150-200 |
VINYL PAPER | 36 | 25-35 | 120-170 |
ASEL ZF 1000
CARBOXYMETHYL CELLULOSE
ASEL ZF 1000 has wide functions into glue&adhesive applications for decorative paint, liquid and regular wallpaper, and also thickening, binding, and viscosity modifier functions for construction, paint and as well as detergent industry. During the application, it is advised to solve ASEL ZF 1000 thoroughly in water to get a better result.
Appearance | Creamy White, Free Flowing Powder |
CMC content (on dry basis) % | 60% Min. |
Degree of Substitution | 0.6 – 0.8 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | Min. 1000 Cps |
Moisture (as packed) % | %8 Max. |
ASEL TD 1000
EXTRA WHITE CARBOXYMETHYL CELLULOSE
ASEL TD 1000 has wide functions into glue &adhesive applications for decorative paint, liquid and regular wallpaper, and also thickening, binding, and viscosity modifier functions for construction, paint and as well as detergent industry. During the application, it is advised to solve ASEL TD 1000 thoroughly in water to get a better result.
Appearance | Extra White, Free Flowing Powder |
CMC content (on dry basis) % | %60 Min. |
Degree of Substitution | 0.6 – 0.8 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | Min 1100 Cps |
Moisture (as packed) % | %8 Max. |
ASEL TD 2000
EXTRA WHITE HIGH VISCOSITY SODIUM CARBOXYMETHYL CELLULOSE
ASEL TD 2000 has very wide range applications such as detergent industry, construction industry, paint industry and as well as glue in wallpaper industry. During the application, it is advisable to solve CMC ASEL TD 2000 throughly in water to get a better result..
Appearance | Extra White, Free Flowing Powder |
CMC content (on dry basis) % | %55 Min. |
Degree of Substitution | 0.6 – 0.8 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | 2000-2500 Cps |
Moisture (as packed) % | %8 Max. |
ASEL EMH 100
CARBOXYMETHYL CELLULOSE, WET CMC (Excellent Adhesive & Adhesion Additive)
ASEL EMH 100 is a cellulose based water soluble polymer with excellent film forming properties.The cellulosic structure makes it a very good adhesive for wallpaper, ceramic proppant and other industrial application. ASEL EMH 100, carries out an excellent adhesive & adhesion additive, either alone or in blends with other polymers.
Appearance | Creamy White, Coarse-Grained Fiber |
CMC content (on dry basis) % | %60 Min |
Degree of Substitution | 0.6 – 0.8 |
pH (%1 Solution) | 8 – 11 |
Viscosity (%2 Sol. Brookfield,20°C) | Min 150 Cps |
Moisture (as packed) % | %35-%45 |
Food
ASEL SFY
Used in products such as ; ice cream, cream cheese, jam, marmalade, fruit juice, bakery products, diet food and beverages and pudding.
FOOD TYPE PURE SODIUM CARBOXYMETHYL CELLULOSE
Appearance | White to creamy, free flowing powder |
CMC content (on dry basis) % | 99.5 min |
Degree of Substitution | 0.75 – 0.85 |
pH (%1 Solution) | 6.5 – 8.5 |
Viscosity (%2 Sol. Brookfield,20°C) | 100 – 100,000 cps |
Moisture (as packed) % | 8 max |
Pharmacy & Cosmetics
ASEL SFY
Toothpastes, shaving creams, shampoos, make-up bases, hand creams,creams, eyeshadows,antiperspirant lotions,tablet binders, calamine lotions,jellies and ointments, pesticide emulsions
FOOD TYPE PURE SODIUM CARBOXYMETHYL CELLULOSE
Appearance | White to creamy, free flowing powder |
CMC content (on dry basis) % | 99.5 min |
Degree of Substitution | 0.75 – 0.85 |
pH (%1 Solution) | 6.5 – 8.5 |
Viscosity (%2 Sol. Brookfield,20°C) | 100 – 100,000 cps |
Moisture (as packed) % | 8 max |
Ceramic, Tile & Electrode
ASEL SY
Purified CMC at 97% level is obtained with treating technical grade by extracting with ethyl alcohol. ASEL SY series are used in ceramic, china, welding rods, cigars, lead-pencils, shoe paint, car waxing and other similar industries in wide ranges of functions.
INDUSTRY TYPE PURE SODIUM CARBOXYMETHYL CELLULOSE
Appearance | White to creamy, free flowing powder |
CMC content (on dry basis) % | 97 min |
Degree of Substitution | 0.75 – 0.85 |
pH (%1 Solution) | 6.5 – 8.5 |
Viscosity (%2 Sol. Brookfield,20°C) | 100 – 100,000 cps |
Moisture (as packed) % | 8 max |
As Acıselsan we are one of the oldest and established companies in the sector and our most valuable asset is nearly half a century of knowledge and experience. Our own R&D works are carried out in fully-equipped Acıselsan laboratory. New products with Acıselsan quality are manufactured accordingly with upgraded technology and experienced engineering team.